• 1/16th DIN 48 x 48mm
• Set-point and process temperatures shown

• ssd & relay as standard
• 9411 - 2 x relay
• 9422 – 2 x ssd
• RS232 module
• RS485 module

• 1/32nd DIN 24 x 48mm

• ssd & relay as standard
• 3311 - 2 x relay
• 3322 – 2 x ssd
• 12-24V on 3300 & 3322
• RS232 module
• RS485 module

• 1/16th DIN 48 x 48mm

• ssd & relay as standard
• 9311 - 2 x relay
• 9322 – 2 x ssd
• 12-24V on 9300 & 9322
• RS232 module
• RS485 module

3300 with comms module fitted

• Full PID autotuning temperature controllers
• Bright LED displays
• Dual-outputs
• Alarms with 5 options
• PID heat-cool operation
• Ramp & soak operation
• Sleeve mounting for easy maintenance
• IP66 protection from front panel
• CE, UL & CSA approvals
• 3-year warranty
• Charting and logging software option
• RS232/485 Modbus option

• Thermocouple
  9 types
  Standards: IPTS/68/DIN 43710
  CJC rejection: 20:1 (0.05°/°C) typical
  External resistance: 100W maximum
  Resistance thermometer
  RTD-2/Pt100 2 wire
  Standards: DIN 43760
  (100W 0°C/138.5W 100°C Pt)
  Bulb current: 0.2mA maximum
  Linear process inputs
  mV range: 0 to 50mV
  Applicable to all inputs SM = sensor maximum
  Calibration accuracy: ±0.25%SM ±1°C
  Sampling frequency: input 10Hz, CJC 2 sec.
  Common mode rejection: Negligible effect up to 140dB, 240V, 50-60Hz
  Series mode rejection: 60dB, 50-60Hz
  Temperature coefficient: 150ppm/°C SM
  Reference conditions: 22°C ±2°C, rated voltage after 15
  minutes settling time.
• Output devices
  SSd/SSd1/SSd2: solid state relay driver: To switch a
  remote SSR 5Vdc +0/-15% 15mA non-isolated
  Miniature power relay: form A/SPST contacts (AgCdO) rLY and rLY1: 2A/250ac resistive load
  rLY2: 1A/250ac resistive load

• General
  Displays: Upper, 4 Digits, high brightness green LED. 10mm (0.4") high.
  Lower, 4 Digits, Orange LED. 9mm (0.35") high (9400 only)
  Digital range -199 to 9999
  Hi-res mode -199.9 to 999.9
  LED output indicators - flashing SP1 square, green; SP2 round, red
  Keypad: 3 elastomeric buttons
• Environmental
  Humidity: Max 80%
  Altitude: up to 2000M
  Installation: Categories ll and lll
  Pollution: Degree ll
  Protection: NEMA 4X, lP66
  EMC emission: EN50081-1 FCC Rules 15 subpart J
  Class A
  EMC immunity: EN50082-2
  Ambient: 0-50ºC (32-130°F)
  Mouldings: flame retardant polycarbonate
  Weight: 130g (4.2 oz)