NuWave NWIPCM -1P SCR Driver Board with phase angle control output and softstart

NuWave Technologies, Inc.

Our products are RoHS compliant.

Use Adobe to read our publications.

INNOVATIVE PRODUCTS > POWER CONTROL

NWIPCM-1P

Inductive Load Power Control Module Phase Angle SCR Driver

SCR DRIVER - INDUCTIVE LOAD POWER CONTROL

Dual phase angle SCR driver provides DC gate drive
True linear output phase angle control w/current feed back
Suitable for resistive and Inductive Loads
PWM input – inexpensive PLC interface
Configurable soft start for high inrush loads
Inputs of 4-20mA, 0-10V, 0-5V, Pot, PWM
Line voltage compensation increases process stability
Configurable soft start for sensitive loads
Automatic 50/60Hz operation
Adjustable voltage and current limit
LED power and output indicators

The microprocessor based NWIPCM-1P provides true linear phase angle of SCRs for resistive and inductive loads. The output power is proportional to the command input which can be dip switch selected from six different industry standard inputs. The high current gate drive is suitable for large SCRs.

The NWIPCM-1P is a phase control module designed for use with high power back to back SCR modules driving resistive or inductive loads. The power delivered to the load is proportional to the command input signal. The gate drive technique used in the NWIPCM is DC drive for the greatest stability for firing inductive loads.

ORDERING CODES

*NWIPCM-1P-120*	120 VAC Power
*NWIPCM-1P-240*	240 VAC Power
*NWIPCM-1P-X-XSS*	Softstart time (seconds)
*NWIPCM-1P-X-XSC*	Softchange tme (seconds) (1 second is default)
*NWIPCM-1P-X-XSS/C-LIV*	Linear RMS Voltage Output (RMS PWR is Default)

*CR8450-1000*	Current transformer required to use the current limit function of the NWIPCM-1P is sold separately.