PRODUCT SELECTOR



Order Online

SSR PHASE ANGLE CONTROLLER BOARD WITH CURRENT LIMIT - SSRMAN-1P-CL

Solid State Relay Phase Angle Controller Board

Download Brochure
Solid State Relay Phase Angle Controller Current Limit & Soft Start
Solid State Relay Phase Angle Controller Current Limit & Soft Start

SSR Mounted Phase Angle Controller Board with Current Limit

  • True linear power output phase angle controller
  • Suitable for inductive loads
  • Small module mounts on the input terminals of an SSR
  • Inputs of 4-20mA, 0-10V, 0-5V, Pot, PWM, etc.
  • Adjustable Current or Voltage limit
  • Line voltage compensation increases process stability
  • Configurable Soft Change for sensitive loads
  • Automatic 50/60Hz operation
  • Single phase and three phase control
  • LED output and current limit indicators

The SSRMAN-1P-CL phase angle controller Board mounts directly on the input terminals of an SSR and provides true linear control of the load. The output power is based on the command input and the current feedback from the current transformer. The command can be dip switch selected from over seven different industry standard inputs.   

The SSRMAN-1P-CL's output power is proportional to the command input which can be selected from seven different industry standard inputs. User configurable features such as Soft Start, Line Voltage Compensation and Voltage Limit make the SSRMAN-1P-CL a perfect fit for any phase angle power controller application. Soft Change and Current Limit are especially useful on high inrush loads such as Quartz, Molybdenum, Tungsten, or Graphite heaters, and the current limit is set via the on-board potentiometer. The SSRMAN-1P-CL's Line Voltage Compensation forces the output power to track changes in line voltage and acts as an efficient feedforward control mechanism which will make any process more stable. Soft Start and Line Voltage Compensation can be set on or off using the configuration dipswitch. Voltage Limit is set via a potentiometer and will limit the voltage on your load by limiting the maximum phase angle allowed on the output. The SSRMAN-1P-CL’s phase angle control board must be used with non-zero crossing, random fire solid state relays. The SSRMAN-1P-CL will not operate properly with zero cross fired solid state relays.

Typical SSRMAN-1P-CL Installation
SSR Mount Phase Angle Controller Board

The SSRMAN-1P-CL may be ordered with software (see ordering code below "-REG") that allows the output to provide a constant current based on the command signal and regardless of load or line voltage changes.

ORDERING CODES

SSRMAN-1P-CL-50-2SC SSR Mount Phase Angle Controller Board, Volts, mA Input, Pot, Current limit to 50Amps, 2 second default soft change.
SSRMAN-1P-CL-100-2SC SSR Mount Phase Angle Controller Board, Volts, mA Input, Pot, Current Limit to 100Amps, 2 second default soft change.
SSRMAN-1P-CL-XXX-2SC-LIV Same as above with linear voltage output response, instead of the standard output of linear power.
SSRMAN-1P-CL-50-2SC-REG SSR Mount Phase Angle Controller Board, Volts, mA Input, Pot, Current Regulation to 50Amps, 2 second default soft change.
SSRMAN-1P-CL-100-2SC-REG SSR Mount Phase Angle Controller Board, Volts, mA Input, Pot, Current Regulation to 100Amps, 2 second default soft change.
   
CR8450-1000 current transformer
Current transformer required to use the current limit function of the SSRMAN-1P-CL is sold separately.

For sales and distribution please call 866-379-3597 Order Online Order online


SSRMAN-1P-CL > DOCUMENTATION

SSR Mount Phase Angle Controller Board - SSRMAN-1P-CL Datasheet


SSRMAN-1P-CL User's Manual